How To Add/Remove Z-wave device and run a Network Rediscovery with Qolsys IQ Panel 2

This guide covers the various Z-Wave pairing processes with the Qolsys IQ Panel 2/2+

1. How to Remove a Z-Wave device from the parent network.

An often overlooked step in the process. In order to remove a device from its parent network:

  • Navigate to the Settings Tray and click Settings
  • Click Advanced Settings
  • Enter your Installer Code
  • Click Installation
  • Then Devices
  • Z-Wave Devices
  • Clear Device.
  • While the panel is listening, utilize the Z-Wave devices add/remove feature (see device manual)

2. Add a Z-Wave device

Once the device is disassociated from any parent network, its time to add it to the panel.

  • Navigate to the Settings Tray and click Settings
  • Click Advanced Settings
  • Enter your Installer Code
  • Click Installation
  • Then Devices
  • Z-Wave Devices
  • Add Device
  • While the panel is listening, utilize the Z-Wave devices add/remove feature (see device manual)

3. Run a Z-Wave Network Rediscovery

A very important step to follow whenever you make any new changes to your Z-Wave network. The Network Rediscovery ensures the best possible communication route for your network. To run a Network Rediscovery:

  • Navigate to the Settings Tray and click Settings
  • Click Advanced Settings
  • Enter your Installer Code
  • Click on System Tests
  • Z-Wave Tests
  • Network Rediscovery+
  • Select all devices via the checkbox
    -Click Rediscover