Sekhon140
August 9, 2023, 3:12pm
1
Hello,
I just moved into a new house that has 2 Honeywell T6 thermostat, I accidentally reset one of them and now it shows as “malfunction” on my IQ 2 panel. I can’t figure how to add the t6 back on the panel… any help would be awesome!
The Z-wave device would need to be removed first from the panel, then relearned.
Steps to do so are described below. They can be done even if the thermostat was factory reset.
This guide covers the various Z-Wave pairing processes with the Qolsys IQ Panel 2/2+ and the IQ Panel 4
1. How to Remove a Z-Wave device from the parent network.
An often overlooked step in the process. In order to remove a device from its parent network. Always do this first when adding a device, because it may still have network data saved within its Z-wave radio and this needs to be cleared before it can be added to a new panel.
Navigate to the Settings Tray and click Settings
Click Adva…