Z wave hook up to IQ2

[jwcsurety (Jason)]

That model is found on the compatible device list from Qolsys.

If it was previously enrolled on a different controller it needs to be cleared first. You can do this from the IQ Panel.

Steps to clear (remove) then add a Z-wave device are listed here:

How To Add/Remove Z-wave device and run a Network Rediscovery with Qolsys IQ Panel 2/2+ and IQ Panel 4

This guide covers the various Z-Wave pairing processes with the Qolsys IQ Panel 2/2+ and the IQ Panel 4 1. How to Remove a Z-Wave device from the parent network. An often overlooked step in the process. In order to remove a device from its parent network. Always do this first when adding a device, because it may still have network data saved within its Z-wave radio and this needs to be cleared before it can be added to a new panel. Navigate to the Settings Tray and click Settings Click Advanc…