Qolsys IQ Panel 4 Firmware Release Information

IQ PANEL 4/IQ4 HUB/IQ4 NS - 4.4.1 SOFTWARE UPDATE

Fixes/Improvements:

  • Added a critical update relating to recovery of cellular connectivity in certain cases where it could become disconnected from the network – this firmware is for all IQ Panel 4, IQ4 Hub, and IQ4 NS systems.

Panels that are not upgraded to 4.4.1 may have difficulty reconnecting to the cellular network, if the cellular interface experiences a disconnection

Update Instructions:

Compatibility Note: Your IQ Panel must be on software version 4.3.0 or higher and connected to Wi-Fi to install this update wirelessly. Panels running 4.0.0, 4.0.1 or 4.1.0 must be updated to 4.1.1 first, which then can be updated directly to 4.2.0 or 4.2.1. Once updated to 4.2.0 or 4.2.1 they can be updated directly to 4.3.0 and then 4.4.1.

  1. Swipe down from the top of the screen and touch “Settings"
  2. Touch “Advanced Settings”
  3. Enter a valid installer code (default is 1111)
  4. Touch “Upgrade Software”
  5. Touch “Patch Tag” and enter the patch iqpanel4.4.1 then touch OK
  6. Touch “Upgrade Using Network” (panel must be connected to Wi-Fi). Update will download and install
  7. Once complete touch “OK” to reboot the panel. DO NOT TOUCH THE SCREEN. The update process will take approximately 5 minutes. After the panel reboots the home screen will appear and the LED will turn green.