jwcsurety
November 5, 2025, 1:57pm
26
To find the option to remove the IQ Remote, go to Settings > Advanced Settings, enter the installer code, then select Installation > Devices > Wi-Fi Devices > IQ Remote.
Power up the IQ Remote by holding the power button down for about 5 seconds.
Once booted up, select Activate Wi-Fi, then use the same network that your IQ Panel 2 is on. With the 9104-840 this can be 2.4 or 5Ghz.
At the IQ Panel 2, navigate to Settings, > Advanced Settings enter the Installer Code (default 1111) > Installation. > Devices > Wi-Fi Devices.
Select IQ Remote Devices, then press on Pair.
At the IQ Remote , select Pair to connect it with the IQ Panel 2.
The IQ Remote …