I’ve sent some commands to sync the weather data to your panel, which may trigger it to upgrade the IQ Remotes as well. I’m also showing that your panel’s firmware is currently out of date. Can you try upgrading your firmware to the latest version?
Steps to do so can be found in the guide below. You will need to use the patch tag iqpanel4.6.1 in order to complete the upgrade. Once the firmware upgrade is complete on the main panel, you will need to perform the upgrade on your IQ Remote PowerG panels. To do so, swipe down from the top of the screen, tap Settings, enter your system’s installer or dealer code, then tap IQREMOTE PG UPGRADE.
Once you’ve completed those steps, does the weather sync correctly between the system and the remote panels?