From now on it requires to enter a password in order to wake up the panel out of “sleep/idle“ mode,
Looks like you have Lock Screen enabled which is why the code on wake is being required.
You can disable this by navigating to Settings > Advanced Settings > Enter the Dealer or Installer Code > Installation > Security and Arming > Screen Lock
Also, I noticed that a lot of setting has gone and I can’t find them (e.g. software updates, some of the admin settings I was able to access before) and when I open the “advance settings“ it doesn’t require password anymore.
This is due to the lock screen, if you enter the Dealer or Installer code when prompted there, you should see the missing Installation and software settings.
Could you help with advice on how to resolve these and whether it’s a normal behavior on latest software?
Its possible the lock screen was enabled during the update.
Looks like your panel is on firmware 4.3.1, I would recommend updating to current, 4.6.1. This will require the use of a patch tag and is somewhat incremental. You need to update from 4.3.1 to 4.4.0 first before you can update to 4.6.1 Firmware update information and patch notes can be found here: