How To connect my Alarm Panel to Wi-Fi

[tyler (Tyler G)]

Most Alarm.com compatible panels can be connected to Wi-Fi for dual-path communication. Steps for a variety of panels can be found below.

2GIG GC3

Connect a 2GIG GC3 to a Wi-Fi network

The panel can be connected to a Wi-Fi network by either manually selecting the network or using Wireless Protected Setup (WPS). The GC3 will need to be on Firmware Version 3.1 or higher. To connect a 2GIG GC3 to Wi-Fi by selecting the wireless network name: From the home screen, tap System Settings. Enter the installer or master code. Tap Network Settings. [Wi-fi-setup] Tap Wireless. Tap to select the wireless network name. Enter the wireless network’s password. Tap Next. To connect a …

Qolsys IQ Panel 2, IQ PAnel 2+, and IQ Panel 4

Connect a Qolsys IQ Panel 2, IQ Panel 2+, and IQ Panel 4 to Wi-Fi

To connect the panel to Wi-Fi, follow the bellow steps. At the panel navigate to: Slide down on the Settings tray and tap Settings Then tap Advanced Settings Enter Installer (1111) or Dealer Code (2222) Tap Wi-Fi Click Enable Wi-Fi if not already checked. Select the desired network and enter credentials [Wi-Fi-Screen]