Existing system, will it work?

[vidail16 (Vidail)]

Hello,

Below are instructions to get them set up

How To Add a Camera to Alarm.com

To enroll a camera, connect the camera to the local network, then associate the camera with the Alarm.com account. There are three local options for connecting video devices to the network: Ethernet, Wi-Fi Protected Setup (WPS) Mode, and Access Point (AP) Mode. Some video devices can only be connected using some of those options, so verify which methods are supported before beginning the enrollment process. Pre-enrollment checklist: AC power adapter (required for non-PoE connections) Broa…

When setting up video analytic rules, make sure you calibrate the camera first

Calibrating Cameras for Video Analytics

Calibrating Cameras for Video Analytics Once you have Video Analytics enabled on your Alarm.com account and you have a compatible camera, its time to get Video Analytics set up! Calibration Note that some cameras will require calibration once they have been installed prior to setting up Video Analytics rules. Those cameras are: 180º HD Camera (ADC-V622) 1080p Outdoor Wi-Fi Camera (ADC-V723) 1080p Indoor Wi-Fi Camera (ADC-V523) The calibration process involves taking five still images of a p…

How to create Video Analytics Rules

Create a Rule with Video Analytics Video Analytics rules can be configured using the Alarm.com website or mobile app. Note : It is possible to create up to three Video Analytics rules on the same camera. Additionally, ground zones and tripwires can overlap. Using the Customer Website: Log into the Customer Website. Click Video . Click Recording Rules . Click Add Rule . In the New Video Recording Rule window, select Video Analytics . Using the Customer app: Log into the Customer app. T…