Alarm.com Streaming Video Recorder SVR and Commercial CSVR

[tyler (Tyler G)]

Streaming Video Recorder Installation

How to connect an SVR-122 to your Alarm.com account

How to connect an SVR-122 to your Alarm.com account

How to connect an SVR to your Alarm.com account Using an Ethernet cable, connect the device to the network’s router. Connect the device’s AC power adapter and plug it into a non-switched outlet. Allow a few minutes for the SVR and router to connect. When the status LED in the front of the SVR is solid green, the connection is complete. Add the device to the account by using the Alarm.com Video Installation Wizard, or by using a web browser and entering the following web address: www.alarm.com/…

How to associate a video device to the SVR-122

How to associate a video device to the SVR-122

How to associate a video device to the SVR You will need to associate a video device with a Stream Video Recorder (SVR) so that the SVR can start recording footage. Video devices can be associated at any time using the Alarm.com website. A video device can only record video to a single SVR at a time. The video device’s existing SVR recording schedule must be deleted before the video device can be associated with a different SVR. Note : The following steps are performed after an SVR is attache…

How To Install the Alarm.com Commercial Stream Video Recorder ADC-CSVR2000P, 2008P, 2016P

How To Install the Alarm.com Commercial Stream Video Recorder (ADC-CSVR2000P/2008P/2016P)

Pre-installation checklist Pro Series CSVR (included) A display with an HDMI input (optional) An HDMI cable (optional) AC power adapter (ADC-CSVR2000P) Power cord (ADC-CSVR2008P/ADC-CSVR2016P) An Ethernet Cat5e cable (included) USB Keyboard and Mouse (optional) Rack mount ears and screws (included, for rack installations) Dedicated network switch (recommended for ADC-CSVR2000P) Ethernet connection to broadband internet (Cable, DSL or Fiber Optic) Alarm.com customer account with a service packag…

How To Associate a video device to an ADC-CSVR2000P/2008P/2016P

How To Associate a video device to an ADC-CSVR2000P/2008P/2016P

Associate a video device with an ADC-CSVR2000P/2008P/2016P so that it can start recording footage. Video devices can be associated at any time using the Alarm.com Website. A video device can only record video to a single SVR at a time. The video device’s existing SVR recording schedule must be deleted before the video device can be associated with a different SVR. Associate a video device with an ADC-CSVR using the Alarm.com Website Note: The following steps are performed after the SVR is atta…