2GIG GC3 Panel Sensor Programming Guide

2GIG-DW10-345 Thin Door/Window Contact, Programmed for an Entry Door

  • Sensor Type: 01 - Exit Entry 1
  • Equipment Code: (0862) 2GIG Thin Door/Window Contact
  • Serial Number: Learn - Trip Sensor
  • Equipment Age: New
  • Sensor Loop: 2
  • Transmission Delay: Disabled
  • Voice Descriptor: As Desired
  • Sensor Reports: Enabled
  • Sensor Supervised: Enabled
  • Sensor Chime: As desired

The following video shows a walkthrough of adding this sensor to your alarm panel.

2GIG-DW10-345 Thin Door/Window Contact, Programmed for a Window

  • Sensor Type: 03 - Perimeter
  • Equipment Code: (0862) 2GIG Thin Door/Window Contact
  • Serial Number: Learn - Trip Sensor
  • Equipment Age: New
  • Sensor Loop: 2
  • Transmission Delay: Disabled
  • Voice Descriptor: As Desired
  • Sensor Reports: Enabled
  • Sensor Supervised: Enabled
  • Sensor Chime: As desired

The following video shows a walkthrough of adding this sensor to your alarm panel.

2GIG-DW10-345 Thin Door/Window Contact, Programmed for a Wired Input

  • Sensor Type: Based on the wired sensor type used
  • Equipment Code: (0862) 2GIG Thin Door/Window Contact
  • Serial Number: Learn - Trip Sensor
  • Equipment Age: New
  • Sensor Loop: 1
  • Transmission Delay: Disabled
  • Voice Descriptor: As Desired
  • Sensor Reports: Enabled
  • Sensor Supervised: Enabled
  • Sensor Chime: As desired

The following video shows a walkthrough of adding an example usage of the wired input to your alarm panel.

2GIG-DW20R-345 Recessed Door Contact

  • Sensor Type: 01 - Exit Entry 1
  • Equipment Code: (0863) 2GIG Recessed Door Contact
  • Serial Number: Learn - Trip Sensor
  • Equipment Age: New
  • Sensor Loop: 1
  • Transmission Delay: Disabled
  • Voice Descriptor: As Desired
  • Sensor Reports: Enabled
  • Sensor Supervised: Enabled
  • Sensor Chime: As desired

The following video shows a walkthrough of adding this sensor to your alarm panel.

2GIG-PIR1-345 Motion Detector

  • Sensor Type: 04 - Interior Follower
  • Equipment Type: Motion
  • Equipment Code: (0869) 2GIG PIR Motion Detector
  • Serial Number: Learn - Trip Sensor
  • Equipment Age: New
  • Sensor Loop: 1
  • Transmission Delay: Disabled
  • Voice Descriptor: As Desired
  • Sensor Reports: Enabled
  • Sensor Supervised: Enabled
  • Sensor Chime: Disabled
The following video shows a walkthrough of adding this sensor to your alarm panel.

2GIG-GB1-345 Glass Break Detector

  • Sensor Type: 04 - Interior Follower
  • Equipment Type: Contact
  • Equipment Code: (0864) 2GIG Glass Break Detector
  • Serial Number: Learn - Trip Sensor
  • Equipment Age: New
  • Sensor Loop: 1
  • Transmission Delay: Disabled
  • Voice Descriptor: As Desired
  • Sensor Reports: Enabled
  • Sensor Supervised: Enabled
  • Sensor Chime: As Desired
The following video shows a walkthrough of adding this sensor to your alarm panel.

2GIG-SMKT3-345 Smoke/Heat/Freeze Detector

  • Sensor Type: 09 - 24 Hour Fire
  • Equipment Code: (1058) 2GIG Smoke Detector
  • Serial Number: Learn - Tamper Sensor
  • Equipment Age: New
  • Sensor Loop: 1
  • Voice Descriptor: Smoke Detector
  • Sensor Reports: Enabled
  • Sensor Supervised: Enabled
  • Sensor Chime: As desired
  • Sensor Type: 09 - 24 Hour Fire
  • Equipment Code: (1058) 2GIG Smoke Detector
  • Serial Number: Learn - Tamper Sensor
  • Equipment Age: New
  • Sensor Loop: 2
  • Voice Descriptor: Heat Detector
  • Sensor Reports: Enabled
  • Sensor Supervised: Enabled
  • Sensor Chime: As desired
  • Sensor Type: 08 - 24 Hour Auxiliary Alarm
  • Equipment Type: Freeze
  • Equipment Code: (1058) 2GIG Smoke Detector
  • Serial Number: Learn - Tamper Sensor
  • Equipment Age: New
  • Sensor Loop: 3
  • Voice Descriptor: Freeze Detector
  • Sensor Reports: Enabled
  • Sensor Supervised: Enabled
  • Sensor Chime: As desired
The following video shows a walkthrough of adding this sensor to your alarm panel.

2GIG-CO3-345 Carbon Monoxide Detector

  • Sensor Type: 14 - 24 Hour Carbon Monoxide
  • Equipment Code: (1026) 2GIG CO Detector
  • Serial Number: Learn - Tamper Sensor
  • Equipment Age: New
  • Sensor Loop: 1
  • Voice Descriptor: Carbon Monoxide Detector
  • Sensor Reports: Enabled
  • Sensor Supervised: Enabled
  • Sensor Chime: As desired
The following video shows a walkthrough of adding this sensor to your alarm panel.