Skybell slim line

[adct2000user]

I have a skybell slimline line and it started blinking orange. I cannot get it off this mode. I have

removed it from installation for over 12 hours and then plugged it back in. I have held the door bell button in for over 3 mins. All it wants to do is blink orange

wondering if there is another way to reset

[nicholas]

A Skybell that is blinking orange indicates that it does not have a network connection.

Steps to resolve a Skybell that is flashing orange can be found here:

SkyBell Doorbell Camera LED is flashing orange

A flashing orange LED state indicates the SkyBell Doorbell Camera does not have a network connection. This is often caused by incorrect wireless information or poor wireless range. If you changed your Wi-Fi information or hardware recently, follow the below guide: To troubleshoot a flashing orange LED on a SkyBell Doorbell Camera: Reboot the SkyBell Doorbell Camera. Allow a few minutes for the video device to power back on reestablish its connection to the Wi-Fi network. If it continues …

[adct2000user]

The issue is nothing I do get the skybell from stop flashing orange.

[nicholas]

What model of SkyBell do you have?

Some models, particularly the ADC-VDB105/106/105x/106x, have a pinhole reset button on the bottom of the device. If you have one, you can insert a paperclip to press and hold down the reset button. Hold it for 30 seconds, then release to reboot the video doorbell.