Reset sensors from ADT system

[tyler (Tyler G)]

To better assist you, what is the model number of sensor you are referencing? If you do not know, you can submit a photo to us.

A variety of installation and programming guides can be found here:

How To Set Up Your New Surety System

Here is how to set up your new Qolsys IQ Panel 4 or IQ4 Hub. Most people find it’s easiest to use the back stand and sit the panel on a table. If you’re going to mount your panel on the wall then wait until this guide says to physically install it. You can’t return it after you’ve mounted it on the wall. 1. Power It On First, you need to power on your new panel. [Power On Panel] Connect & Charge Battery Qolsys panels usually ship with the battery disconnected. You’ll need to connect the ba…