Remove objects

[memorice]

I’m trying to figure out how to remove a lock and a sensor from my system.

We had a door replaced, and the sensor was damaged during the removal. The door uses a different lock style so I need to remove that as well.

I’m getting notifications about malfunctions, and can’t find a way to remove said devices.

Thanks!

[jwcsurety (Jason)]

Looks like this is regarding an IQ Panel 2. See the support pages below for removal of a sensor and a z-wave device. These are separate processes.

How to Remove a Sensor from the Qolsys IQ Panel 2/4

If you need to remove a sensor from your Qolsys IQ Panel 2 or IQ Panel 4 (same menu path), you can do so easily by following this video!

How To Add/Remove Z-wave device and run a Network Rediscovery with Qolsys IQ Panel 2/2+ and IQ Panel 4

This guide covers the various Z-Wave pairing processes with the Qolsys IQ Panel 2/2+ and the IQ Panel 4 1. How to Remove a Z-Wave device from the parent network. An often overlooked step in the process. In order to remove a device from its parent network. Always do this first when adding a device, because it may still have network data saved within its Z-wave radio and this needs to be cleared before it can be added to a new panel. Navigate to the Settings Tray and click Settings Click Adva…