PowerG Water Sensor shows not networked

[novamag]

After intalling/reinstalling multiple times new powerg water sensors still showing not networked.

Removed and reinstalled batteries. Batteries shipped upside down on new sensors and need to be flipped to work properly.

[nicholas]

A Not Networked trouble condition indicates that the sensor has been enrolled, but not synced with the system. It may resolve on it’s own during the next supervision check, but you may need to tamper the sensor’s cover in order to get it to sync properly.

Steps to resolve a Not Networked trouble condition can be found here:

How To Resolve the Not Networked Trouble Condition for PowerG sensors on Qolsys

The Not Networked trouble condition means that a PowerG sensor is enrolled, but is not networked into the system and cannot function fully. The device is out of sync with the wireless network or was not synchronized with the network after enrollment. This issue may resolve on its own at the next supervision check but when it doesn’t, try the following: Check for resolution after each step: Verify the device is physically present. Verify the device is within range of the panel. Verify the dev…