this is a list for optimizing and fully enabling the 2GIG panel for those coming over from Vivint
To access panel setting configuration:
Logo>enter installer code>system configuration>" go to", then enter “05”, then “go to”, enter " 06", then “go to”, enter " 07"… etc, for each Q. (For example, to disable Q44 lockout, hit “go to”, then enter 44, then enter 0. Numbers in parentheses are the numbers to enter on each programming (Q)uestion)
IF you have smoke detectors, Codes require Q46 to be set to “0”
Q20 Swinger shutdown count is now code required to be set for “2”
Q5(60)
Q6(30)
Q7(45)
Q8(0) disabled leave disabled unless you have telephone/POTS monitoring **
Q9 **
Q10 **
Q11 **
Q12 **
Q13(2)
Q14(1)
Q15(0)
Q16(1) select (2) for silent police panic
Q17(1)
Q18(1)
Q19(1)
Q20(2)
Q21(0) wired siren supervision (leave disabled unless you have a wired siren)
Q22(7)
Q23(30)
Q24(1)
Q25(1)
Q26(0)
Q27(1)
Q28(1)
Q29(1)
Q31(5)
Q32(1)
Q33(0)
Q34(10)
Q35(1)
Q36(0)
Q37(4)
Q38(10)
Q39(1)
Q40 **
Q41 **
Q42(3)
- Q43(installer code) change this, do not leave default
Q44(0) lockout disabled
Q45(0) lockout disabled
Q46(1) select (0) for UL985 fire/smoke detector equipped systems
Q47(0)
Q48(000000)
Q49(0)
Q50(1)
Q51(0)
Q52(1)
Q53(1)
Q54(1)
Q55(0)
Q56(0)
Q57(0)
Q58(1)
Q59(0)
Q60(1)
Q61(1)
Q62(1)
Q63(0)
Q64(1)
Q65(1)
Q66(1)
Q67(03)
Q68(2)
Q69(11)
Q70(1)
Q71(1)
Q72(0) Quick Bypass select (1)enabled IF using secondary Keypads (2GIG-PAD1)to arm system.
Q73(1)
Q74(1)
Q75(1)
Q76(0)
Q77(3)
Q78(11)
The following is for enabling/setting zwave/home automation functionality
Q79(3) enabled (select (2) if you do not have empower add on and want to control zwave rules/scenes from panel )
Q80(1) enabled switches/lights
Q81(1) enabled thermostats
Q82(1) enabled door locks
Q83(0) F° (select (1) for C° tstat temp display)
Q84(0) services require code (disabled)
Q85(1) master user zwave toolbox access (zwave device install)
Q86(0)
Q87(0)
Q88(0) zwave siren mode (burglary and fire)
Q89(1) backlight always on option
Q90(2) enabled zwave energy feature/metering
Q91(1) ADC cellular module
The following is for enabling and configuring IP broadband Internet connectivity (requires Go!Bridge)
Q92(0) none Network Device
Q93(30) broadband network failure time
Q94(1) enabled broadband network failure causes trouble
Q95(1) enabled broadband network failure reports
Q96(0) commercial burglary support
Q97(0) Select Sound on Normal Closing Acknowledgment