Linear GoControl and LiftMaster garage opener

[davidsimmonds]

I have a two Linear GoControl units and two LiftMasgter garage door openers. The LiftMaster units are only a couple of years old. The GoControl units are wired to the terminals that go back to the wall mounted opener panels. Activating the Linear devices via zwave only sounds the beepers on the Linear device. They do not open the doors. Is this something that is no longer supported by LiftMaster?

[jwcsurety (Jason)]

Liftmaster openers compatible with MyQ do not work with Linear Z-wave openers.

Any opener with a MyQ logo or Craftsman Assurelink logo is not compatible with this device, and a LiftMaster remote solution should be used instead.

How To Setup a Linear Z-Wave Garage Controller

Linear Z-Wave Garage Controller [gd00z] The Linear Z-Wave Garage Controller connects directly to your Garage Opener and communicates with your panel via Z-Wave to allow for remote access and automation via Alarm.com. When considering the Linear GD00Z Garage Controller, keep in mind that it is a Z-Wave device and will likely require additional Z-Wave devices to communicate successfully and consistently. More on setting up a Z-Wave network can be found here. Garage door opener compatibility The…