Interlogix concord 4 smoke detector⁹

[jwcsurety (Jason)]

No, not quite. You would need to program the sensor into your panel. (and remove the current sensor programming) Instructions to program new sensors and remove sensors from the panel are found in the guide below.

How To Program Sensors into an Interlogix Concord 4

Program sensors on an Interlogix Concord Security sensors must be enrolled locally on an Interlogix Concord, but some settings (i.e., sensor groups) can be remotely configured after sensors are enrolled. An alpha-numeric keypad is recommended for programming. Key Function # Select item (Enter) * Go back one tier (Escape or exit) A Scroll up within the menu B Scroll down within the menu C Insert pause when entering phone numbers D Delete (where applicable) 1 Off (where appl…