Indoor Window Sensor

[tyler]

If you just need to edit the sensor id:

At the alarm panel, go to Settings > Advanced Settings > enter installer code > Installation > Devices > Security Sensors > Edit Sensor.

In the Sensor ID field, Change the ID to match that of the new sensor.

A visual guide of the menu choices can be found here:

How to Program a Qolsys IQ Panel 2+ and 4 w/ 345MHz Radio

This guide covers some common programming choices for the Qolsys IQ Panel 2+ and IQ Panel 4 alarm panels with 345MHz radio. This version of the IQ Panel is compatible with 2GIG and Honeywell legacy sensors. Below is the pathway taken at the panel to access sensor programming. We recommend choosing the Auto Learn Sensor feature. [Qolsys-Senosr-Programming] After choosing Auto Learn Sensor, the panel will begin to listen for the sensor’s signal. It is at this point that you would tamper or tri…