Additional considerations when using the IQ Card Ethernet QC000B-840
When powering up the panel for the first time after installing the IQ Card Ethernet, you may encounter a Wi-Fi Error on the System Check page of the Home screen.
To resolve this, you will need to disable Wi-Fi Warning Messages in Dealer/Installer Settings of panel programming.
- Wi-Fi and Ethernet cannot be used at the same time on the IQ Panel 4. Once the ethernet card is installed, to use Wi-Fi, the ethernet cable must be removed from the card.
- Anytime you plug in the ethernet cable, Wi-Fi at the panel is disabled and would need to be re-enabled once you remove the Ethernet cable. The panel will not revert to Wi-Fi automatically if the cable is removed. The card does not need to be removed to do this.
- Live View with Alarm.com cameras at the panel is not supported with this integration. While some cameras may connect, others may not. Your mileage may vary.
- Firmware updates for the IQ Panel 4 must be done over Wi-Fi.