How to get started using Surety with a Simon XT, XTi, and XTi-5 Panel

[tyler (Tyler G)]

How To Program Sensors into a Simon XT

To program a sensor or keyfob using the panel: Scroll to System Programming , then press [O K] . Enter the dealer or installer code, then press [O K] . Scroll to Sensors , then press [O K] . The display shows Learn Sensor. Press [O K] . The display shows Trip Sensor ##, with the number signs flashing. When programming (learning) sensors, the panel uses an ascending sequence starting with 1. To program the sensor into a specific sensor number slot, enter a two-digit sensor number immediately…

How To Program Sensors into a Simon XTi and XTi-i5

To enroll a sensor using the panel: Tap Settings Gear Icon. Scroll to down Programming , then tapEnter Enter the installer code, then tap OK . Tap Sensors . Tap Learn Sensors . Trigger the sensor by pressing the sensor program button or releasing the sensor tamper switch. The Edit Sensor screen appears when the sensor is found. To change the sensor number: Tap Edit next to Sensor Number . Enter the new sensor number, then tap Save . Note : The sensor number can only be edited during sensor …