Changed gatway, IQ panel won't connect to wi-fi

[tyler]

To troubleshoot, access Wi-Fi settings on the main panel and disable Wi-Fi via the checkbox located at the top right hand side of the screen.

Next, reboot the panel (settings > advanced settings > reboot)

Once rebooted, wait 5 minutes, re-enable Wi-Fi. Do you see the network you are trying to connect to?

Connect a Qolsys IQ Panel 2, IQ Panel 2+, and IQ Panel 4 to Wi-Fi

To connect the panel to Wi-Fi, follow the bellow steps. At the panel navigate to: Slide down on the Settings tray and tap Settings Then tap Advanced Settings Enter Master User (1234), Installer (1111) or Dealer Code (2222) Tap Wi-Fi Click Enable Wi-Fi if not already checked. Select the desired network and enter credentials [Wi-Fi-Screen]