The Sensor Bypassed trouble condition indicates the system is not actively monitoring a sensor due to it being in a not ready state (i.e. closed) when the system was armed.
Disarm the system.
When all sensors are in a ready state, re-arm the system.
If the sensor is still bypassed locally, verify the sensor is in a ready state (i.e., closed) and is functioning properly.
An offline or malfunction indicates the sensor(s) are unable to communicate with the panel. Steps on how to identify and resolve this can be found here:
Additionally, your firmware is out of date. A list of firmware, patch notes, and update instructions can be found here: