Alarm.com 180° HD Camera ADC-V622

[tyler (Tyler G)]

Installation and Setup

How To Install the Alarm.com 180° HD Camera (ADC-V622)

Pre-installation checklist ADC-V622 camera (included) AC power adapter (included, required for non-PoE connections) Broadband (Cable, DSL, or Fiber Optic) Internet connection A computer, tablet, or smartphone with Wi-Fi is required if the router does not have the Wi-Fi Protected Setup (WPS) feature [ADC-V622_back_of_camera] [Overview_V723] Add the camera to an Alarm.com account To add a camera, connect the camera to the customer’s wireless network and then enroll the camera to the Alarm.…

LED reference guide

LED Pattern	Status	Description
	Internet connection	Local network and internet connection
	Local network connection	Local network connection only, no internet
	No network connection	No local network or internet connection
	System booting	Camera is booting
	WPS Mode	To enter WPS mode, push the Menu button and use the Volume buttons to scroll to WPS Mode. See the instructions above to add the camera to your router and account using WPS mode.
	AP Mode	To enter AP mode, push the Menu button and use the Volume buttons to scroll to Access Point Mode. See the instructions above to add the camera to your router and account using AP mode.
	Bluetooth pairing	To pair with Bluetooth, push the Menu button and use the Volume buttons to scroll to Bluetooth mode.
	Factory Reset	Caution: This restores factory-default settings to the camera. If already installed, the camera may need to be removed from the Alarm.com account and re-added after a factory reset. To perform a factory reset, push the Menu button and use the Volume buttons to scroll to the Factory Reset option. Follow the audio prompts to initiate a Factory Reset.