1080p Outdoor Wi-Fi Camera ADC-V723

1080p Outdoor Wi-Fi Camera (ADC-V723)

Get smarter video alerts and high-quality live and recorded video with the ADC-V723. Powerful Video Analytics from can detect and alert you to people, vehicles, and animals entering your property.

With a wide field of view, night vision, and High Dynamic Range (HDR), the ADC-V723 lets you see what’s important – no matter the time of day or lighting conditions.


  • 117° field of view
  • High Dynamic Range (HDR)
  • Wi-Fi (2.4 or 5 GHz)
  • Waterproof & Dust-tight

Included Accessories

  • Power adapter
  • Mounting hardware
Maximum resolution 1920 x 1080
Recording compression H.264
Ingress Protection IP66
Image sensor 1/2.7” CMOS, 2.1 MP, 1920 x 1080
Lens 3.0 mm, F2.0
Angle of view 117°
Low-light sensitivity 0 lux with IR
IR range Up to ~40 ft (12 m)
Image adjustments Flip, brightness, contrast, saturation, sharpness, exposure
Wireless connectivity 802.11 b/g/n, 2.4 & 5 GHz
Operating temperature -13°F - 113°F (-25°C - 45°C)
Operating humidity <95% Non-condensing
Dimensions (WxH) (L x W x H) 2.5 x 2.5 x 4.5” (6.4 x 6.4 x 11.4 cm)


Power 12 V - 1 A DC power adapter (included)
Network Wi-Fi (2.4 or 5 GHz) connection to broadband Internet

Camera Installation and Setup

LED Guide

LED pattern Description
OFF Power off
Solid Green Connected to
Flashing Green Local network connection
Alternating Green and Red Camera reverting to factory default settings
Solid Red) No local or Internet connection
Flashing Red Power on, camera booting
Flashing Blue WPS mode
Flashing White Wi-Fi access point mode


  • If you have issues connecting the camera to the account, power cycle the camera and try again.
  • If issues persist, reset the camera to factory defaults. Press and hold the Reset button located on the bottom of the camera until the LED is flashing Green and Red (about 15 seconds), then release the button. The camera will reboot with factory defaults.

Important: If the camera was previously installed to an account, it will need to be deleted before it can be installed again. If this is the case, only the original user or dealer can do this.

  • Prolonged exposure to sunlight in extreme conditions may impact the camera’s performance. The optimal installation location is in a shaded area (e.g., under an eave).