ADC-SWV100 Smart Water Valve

[Wgillikin]

I want to include a water shut off valve in my system. Since I don’t have a 1/4 turn type handle for the main shut off I need to get a plumber involved regardless of what product I choose. At this point I’m looking at the ADC-SWV100. I have installed an IQpanel 4 and all of the sensors are 319.5 MHz devices which includes all my flood sensors. I’m a bit confused as to how/will this device live comfortably on my system. I watched a video about how to install the ADC-SWV100 and the installer had a z-wave controller that he paired with the ADC-SWV100. What is it, do I need it, where do I get it?

[jwcsurety (Jason)]

The IQ Panel 4 is a Z-wave controller. You would pair the SWV100 with the IQ Panel 4.

Z-wave device pairing steps for the IQ Panel are described here:

How To Add/Remove Z-wave device and run a Network Rediscovery with Qolsys IQ Panel 2/2+ and IQ Panel 4

This guide covers the various Z-Wave pairing processes with the Qolsys IQ Panel 2/2+ and the IQ Panel 4 1. How to Remove a Z-Wave device from the parent network. An often overlooked step in the process. In order to remove a device from its parent network. Always do this first when adding a device, because it may still have network data saved within its Z-wave radio and this needs to be cleared before it can be added to a new panel. Navigate to the Settings Tray and click Settings Click Advanc…

[Wgillikin]

Excellent, Jason. Thanks again.