2gig cam hd100

[nicholas]

Certainly!

You will need to use the ETH MAC address when adding an HD100 to your Alarm.com account. Instructions for adding a camera to Alarm.com can be found in this guide

How To Add a Camera to Alarm.com

To enroll a camera, connect the camera to the local network, then associate the camera with the Alarm.com account. There are three local options for connecting video devices to the network: Ethernet, Wi-Fi Protected Setup (WPS) Mode, and Access Point (AP) Mode. Some video devices can only be connected using some of those options, so verify which methods are supported before beginning the enrollment process. Pre-enrollment checklist: AC power adapter (required for non-PoE connections) Broa…

Are you getting any error messages when trying to add the cameras?