1080P Indoor/Outdoor Varifocal Dome Camera ADC-VC847PF

[tyler (Tyler G)]

Troubleshooting

Factory reset an ADC-VC847PF to its default settings

Resetting a video device to its factory defaults removes all programming and memory from the device. Important: Wait at least 2 minutes for the video device to power on fully before performing the following procedure. The factory reset might fail if the device is still powering on. Press and hold the Reset Button for 15 seconds until the LED flashes red and green. Wait for the device to reboot. [847PF_top_three_quarter] LED indicator Reset button MicroSD card slot Lens Lens positioning sy…