Okay, I drew up a diagram so far and I have a few questions. I am trying to wire this as clean and professional as possibly.
So, for the back up battery on the Take over 345 modules, I drew in the diagram that I’ll just combine all of them and run a single wire from the wire nut to the back up battery. I will do that for the negative and positive to the back up battery. Would that be correct?
Now on the Vista panel. Number 1/2 go to the transformer to power up the panel.
On the 4 Take over modules, I would just run all of the wires to a wire nut, and run a single wire out of the wire nut
So On the take over modules, the Ground and the 12V Would run to what number on the take over module? Would I run the Ground from all the take over modules to number 4, and run the 12V to number 5 on the vista panel?
I will ask you another question once you answer this one, So I’m not getting ahead of myself.
heres my diagram.
