Upgrading GC2 to Edge

[vidail16 (vidail)]

@zwavezeph

My research has pointed me to the 2GIG Edge, Qolsys IQ Panel 2+, and Qolsys IQ Panel 4

All three panels are compatible with Surety however the IQ Panel 2+ has been discontinued and the IQ Panel 4 would be the newer generation.

@zwavezeph

I found a new-in-box 2GIG Edge for $250 that I think should be compatible with my existing devices. If I buy this, what would be the procedure for transitioning to the new panel? Would it basically be this:

This is one option of doing it. The easier way would be to restore the sensors and user codes via a backup. There is currently a backup on your account from January 26th that can be used to restore the sensors and user codes. The 2GIG EDGE panel will need to be on firmware 1.3+ in order to restore the backup.

Backup and Restore Process for 2GIG Brand Panels (Go!Control, GC2, GC3, eSeries, Edge

What can be Backed up and Restored? Depending on the differences between the versions of the original and new panel, there may be limitations on the settings that can be restored from a backup. Panel models that are the same (e.g., swapping a GC3 with a new GC3) are able to restore all panel programming settings, user codes, and sensors. The following table outlines what settings can be restored from the original panel to the new panel. Note: GoControl and GoControl 2 (GC2) panels are noted to…