Hello,
Temperature change events for today are included below:
Thermostat extreme high offset event triggered a monitor notification (iphone push succeeded) 8/20/2024 12:45:16 pm Add command schedule 153 (Automated) [(Acknowledged at 8/20/2024 12:45:18 pm) ACK Token: 76] 8/20/2024 12:45:15 pm Thermostat Weather Event - Energy Savings (Today) 8/20/2024 12:45:15 pm Thermostat Sensor Left Open Thermostat Restoral 8/20/2024 12:10:04 pm Z-Wave Generic Command: Node id=6, Thermostat Mode set to: Auto (Automated) [(Acknowledged at 8/20/2024 12:10:05 pm) ACK Token: 26] 8/20/2024 12:10:04 pm Monitor -Thermostat Sensor Left Open Thermostat Change 8/20/2024 10:50:02 am Command - Z-Wave Generic Command: Node id=6, Thermostat Mode set to: Off (Automated) [(Acknowledged at 8/20/2024 10:50:03 am)] 8/20/2024 10:50:02 am
This trouble is a common issue without a known fix, discussions can be found here and here. Often disabling then reenabling the rules can resolve the issue. If no success, try rebooting your panel and report back if you are still having the troubles.