Qolsys IQ 4 System gets slow then reboots

[tyler]

I’m not showing anything on the morning of the 29th that would suggest any issue. How long has this been occurring for?

When you powered off the panel, did you disconnect the internal battery as well?

If not, do a full power cycle

How to Power Cycle a Qolsys IQ Panel 2, IQ Panel 4, and IQ 4 Hub

To Power Cycle a Qolsys IQ Panel 2, IQ Panel 4, and IQ 4 Hub If possible, turn off through panel programming first. If this is not possible, move to step 2. Navigate to Settings > Advanced Settings > Enter Dealer/Installer/Master User Code > Power Down to turn off the Qolsys panel. Unplug the power supply from the wall outlet Open the panel and disconnect the internal battery. Leave the panel powered down for at least 2 minutes. Plug the battery back in, close up the panel and reconnect the…

If the full power cycle was already done, from the panel, navigate to Settings > Advanced Settings > Enter Installer Code > System Tests > Input Voltage Test> What is the result?