Qoisys panel & Zwave devices

[jwcsurety (Jason)]

The Qolsys panel is a Z-wave controller. It has the Z-wave radio built in.

Steps to link compatible Z-wave devices to your panel are found in the link below.

How To Add/Remove Z-wave device and run a Network Rediscovery with Qolsys IQ Panel 2/2+ and IQ Panel 4

This guide covers the various Z-Wave pairing processes with the Qolsys IQ Panel 2/2+ and the IQ Panel 4 1. How to Remove a Z-Wave device from the parent network. An often overlooked step in the process. In order to remove a device from its parent network. Always do this first when adding a device, because it may still have network data saved within its Z-wave radio and this needs to be cleared before it can be added to a new panel. Navigate to the Settings Tray and click Settings Click Adva…

Some Z-wave devices may not be compatible. Sticking to Z-wave devices found on this page will ensure the best results, the devices found there are officially supported by Alarm.com.