PG9905 on IQ Panel Questions

[andrewlangley (Andrew L)]

Hi Surety Team! Two questions on the 9905

1. How do I set the low temp trip temperature?
2. How do I attach the temp probe to the sensor board. I cant find anything in the one page manual they sent and the board itself is not labeled the DSC probe has a blue and brown wire

[andrewlangley (Andrew L)]

i found the threshold but still dont know about the probe

[jwcsurety (Jason)]

Connect the wires to the terminal block, labeled B in the image below. There are two inputs. The probe wire would not have polarity to follow.

[andrewlangley (Andrew L)]

Thanks Jason!