Panel and Remote Panel show different weather forecasts

[nicholas]

Can you try performing a power cycle on both of those panels?

Steps to perform a power cycle can be found here:

How to Power Cycle a Qolsys IQ Panel 2, IQ Panel 4, and IQ 4 Hub

To Power Cycle a Qolsys IQ Panel 2, IQ Panel 4, and IQ 4 Hub If possible, turn off through panel programming first. If this is not possible, move to step 2. Navigate to Settings > Advanced Settings > Enter Dealer/Installer/Master User Code > Power Down to turn off the Qolsys panel. Unplug the power supply from the wall outlet Open the panel and disconnect the internal battery. Leave the panel powered down for at least 2 minutes. Plug the battery back in, close up the panel and reconnect the…