In order to stream video to the IQ Remote PG, it must be over wi-fi.
- For the remote keypad, it can be operated via PowerG or Wifi. Video to this requires Wifi. Is the IQ Pro different than IQ4 Panel? Can the iQ Pro have ethernet and wifi enabled at the same time? That way the remote panel can have the camera feed? So basically, can IQ Pro do Cellular/Ethernet for monitoring but Wifi to talk to the remote keypads? Or am I stuck with PowerG because I want ethernet for monitoring?
Once Ethernet is connected to IQ Pro, Wi-Fi is unavailable.
Currently, the IQ Remote PG cannot stream video at all when connected to the IQ Pro. This should be an option with upcoming firmware 4.4.x.n (no ETA atm).
- Wi-Fi and Ethernet cannot be used at the same time on the IQ Panel 4. Once the ethernet card is installed, to use Wi-Fi, the ethernet cable must be removed from the card.
- Anytime you plug in the ethernet cable, Wi-Fi at the panel is disabled and would need to be re-enabled once you remove the Ethernet cable. The panel will not revert to Wi-Fi automatically if the cable is removed. The card does not need to be removed to do this.
- Live View with Alarm.com cameras at the panel is not supported with this integration. While some cameras may connect, others may not. Your mileage may vary.
- Firmware updates for the IQ Panel 4 must be done over Wi-Fi.
- While the standard IQ table stand accommodates the ethernet card, the Sub-Woofer stand does not.