Latest 2GIG Go Control 2 Voice Descriptors

Support
1

Hi,

Do you have a good source for the very latest list of Go Control 2 Voice Descriptors? I have a fairly recent Installation & Programming Guide and have looked at several more online. If you can point me to a reliable (free) source for the latest version, that would be great. Anyway, I am installing a 2GIG-FT6-345 water leak and temperature sensor at my attic water heater. Thank you for supplying an excellent entry for the appropriate settings already. I always try to make the voice descriptors as accurate as possible within the vocabulary constraints. In particular, I was looking for a code for “LEAK” and “HEATER” or “WATER HEATER” or “APPLIANCE”.

Thanks for any help.

2

There have not been any additions since 1.13 firmware I believe. Although keep in mind all descriptors can be scrolled to with the left and right arrows in programming if you need to look for words. The Voice Descriptor list can be found here.

For the location you are referring to “Attic Water Heat” would likely work, or “Attic Flood”.

3

Thank you.