IQ Panel Error

[tyler (Tyler G)]

The sensor is named during programming in the sensor name field.

To start navigate to:

1. Settings
2. Advanced Settings
3. Enter Installer Code
4. Installation
5. Devices
6. Security Sensors

Follow the steps in the below guide to program a PowerG sensor with your panel:

Qolsys IQ Panel 2, IQ Panel 4 Sensor Programming PowerG

This guide covers some common programming choices for PowerG sensors wth the Qolsys IQ Panel 2/2+, and 4 alarm panels. Below is the pathway taken at the panel to access sensor programming. We recommend manually programming the sensor. To do so, tap Settings > Advanced Settings > enter installer code > Installation > Devices > Security Sensors. Use the Add Sensor option and this will open the sensor configuration page. First set the Source field near the bottom right to PowerG. From there, ent…

PG9312 - Add Battery during Auto Learn Mode to initiate the pairing process.