This portion of the guide covers the various Z-Wave pairing processes with the 2GIG Edge panel.
1. How to Remove a Z-Wave device from the parent network.
An often overlooked step in the process. In order to remove a device from its parent network:
- From the home screen tap ** Settings**
- Then enter your Installer Code
- Tap Smart Home Settings
- Click on Remove Devices
- While the panel is listening, utilize the Z-Wave devices add/remove feature (see device manual)
2. Add a Z-Wave device
Once the device is disassociated from any parent network, its time to add it to the panel.
- From the home screen tap Settings
- Then enter your Installer Code
- Tap Smart Home Settings
- Click on Add Devices
- While the panel is listening, utilize the Z-Wave devices add/remove feature (see device manual)
3. Run a Z-Wave Network Rediscovery
A very important step to follow whenever you make any new changes to your Z-Wave network. The Network Rediscovery ensures the best possible communication route for your network. To run a Network Rediscovery:
- From the home screen tap Settings
- Then enter your Installer Code
- Tap Smart Home Settings
- Click on Rediscover Network
- Tap Start