Alarm.com Stream Video Recorder ADC-SVR122

[tyler (Tyler G)]

Installation and Setup

How to connect an SVR-122 to your Alarm.com account

How to connect an SVR to your Alarm.com account Using an Ethernet cable, connect the device to the network’s router. Connect the device’s AC power adapter and plug it into a non-switched outlet. Allow a few minutes for the SVR and router to connect. When the status LED in the front of the SVR is solid green, the connection is complete. Add the device to the account by using the Alarm.com Video Installation Wizard, or by using a web browser and entering the following web address: www.alarm.com/…

How to associate a video device to the SVR-122

How to associate a video device to the SVR You will need to associate a video device with a Stream Video Recorder (SVR) so that the SVR can start recording footage. Video devices can be associated at any time using the Alarm.com website. A video device can only record video to a single SVR at a time. The video device’s existing SVR recording schedule must be deleted before the video device can be associated with a different SVR. Note : The following steps are performed after an SVR is attache…

Additional SVR Information

Alarm.com Streaming Video Recorder SVR and Commercial CSVR

The Streaming Video Recorder (SVR) provides 24/7 Local Video Storage and allows for automatic remote access, mobile app compatibility and cloud management. The SVR is optimized to be bandwidth efficient by only using internet bandwidth for critical video playback and secure cloud recording. You can also remotely connect to the SVR for local and remote playback of continuous video recordings. Installation is relatively simple being similar to Alarm.com video camera set-up. To install and use th…