Alarm.com Indoor Fixed w/IR ADC-V522IR

[tyler (Tyler G)]

Setup and Installation

How to Install an Indoor Fixed w/IR Camera ADC-V521IR and ADC-V522IR

Pre-installation checklist ADC- V521IR ADC-V521IR camera (included) AC Power adapter (included) Ethernet or Wireless (2.4 GHz) connection to broadband (Cable, DSL, or Fiber Optic) Internet A computer, tablet or smartphone with Wi-Fi is required if the router does not have the Wi-Fi Protected Setup (WPS) feature Login and Password for the Alarm.com account to which you will add the camera [521install] ADC-V522IR ADC-V522IR camera (included) AC Power adapter (included) Ethernet or Wireless…

LED reference guide

Connection status

• Sold Green: Internet Connection - Local network and internet connection
• Flashing Green: Local network connection - Local network connection only, no internet
• Sold Red: No network connect - No local network or internet connection
• Flashing Red: System booting - Camera is booting

Wireless enrollment

• Flashing Blue: WPS Mode- To enter WPS mode, push the WPS button and release when flashing blue (about 3 seconds)
• Flashing White: AP Mode - To enter AP mode, push the WPS button and release when flashing white (about 6 seconds).

Factory reset

• Flashing Green and Red: Factory Reset - This will restore factory-default settings to the camera. If already installed, the camera may need to be removed from the Alarm.com account and re-added after a factory reset. To perform a factory reset, push the WPS button and release when flashing Green and Red (about 15 seconds).