LED reference guide
| LED pattern | Description |
|---|---|
| Off | Power off |
| Solid green | Connected to Alarm.com |
| Blinking green | Local network connection |
| Blinking red and green | Reverting to factory default settings |
| Blinking red | Power on, camera booting |
| Solid red | No local or Internet connection |
| Blinking blue | WPS mode |
| Blinking white | Wi-Fi Access Point mode |
Troubleshooting
- If you have issues connecting the camera to the account, power cycle the camera and try again.
- If issues persist, reset the camera to factory defaults (Factory Reset). Press and hold the WPS/Reset button until the LED is flashing green and red (about 15 seconds), then release the button. The camera will reboot to factory default.
- If the camera was previously installed to an Alarm.com account, it will need to be deleted before it can be installed again.