Adding wireless window sensor to Vista System

[jwcsurety (Jason)]

No worries, you can find a guide to programming the Vista panel here:

Manually program a sensor to a SEM-Honeywell/ADEMCO Vista

Steps on how to access and program sensors on the Vista 15P and 20P can be found below: At the programming keypad: Enter the installer code. Press [800] to enter programming. Press [*][56] to enter sensor programming. The screen displays Set to confirm. The default is 0 for No. If 1 is entered for Yes, you will be prompted later in programming to confirm each transmitter after entering the serial and loop numbers. Press [1][*]. This prompts to enter the desired zone number to program. Enter t…