Add 2gig siren

[jwcsurety (Jason)]

It looks like this is for a GC3.

The GC3 is a discontinued panel, but it did support a couple Z-wave sirens.

Similar posts about the GC3 and sirens are found below. The first link has some previously confirmed model info and the second link suggests a work-around if the Z-wave siren model used is not immediately sounding on an alarm.

2gig GC3 Supported Hardware

I was looking into the Everspring SE812 as an option for my GC3 panel, but a review on Amazon.com says it didn’t work with the GC3. Anyone have confirmation that this will work? Also, how reliable are these Z-Wave sirens? I don’t have any other Z-Wave components yet. What other options are there? Thanks, Dino

Z-Wave Siren and 2GIG GC3

Hello. I purchased a zwave alarm siren to add to my system but I do not know how to add it so that it will sound on an alarm event. I put my system in test mode with central station, and triggered an alarm, and it did not sound. I was able to successfully add the siren as a device to the system, so that’s not the problem. I looked into the zwave rules section (under emPower) of my panel, and I found an option to add an event upon triggering an alarm. But my siren did not show up under the devi…