ADC-T40K-HD Enable time on display

[Alfred]

Sorry about that, it turns out this one needs to be added back manually. Quick check first: which thermostat did you reset, Upstairs or Downstairs?

Here are the steps for your IQ Panel 5, including clearing it first and running a Network Rediscovery after:

How To Add/Remove Z-wave device and run a Network Rediscovery with Qolsys IQ Panel

This guide covers the various Z-Wave pairing processes with the Qolsys IQ Panel 2/2+ , the IQ Panel 4 series, and IQ Panel 5 Series 1. How to Remove a Z-Wave device from the parent network. An often overlooked step in the process. In order to remove a device from its parent network. Always do this first when adding a device, because it may still have network data saved within its Z-wave radio and this needs to be cleared before it can be added to a new panel. Navigate to the Settings Tray and…

Once it’s added, let us know and we’ll confirm it’s connected on our end. Then check whether the clock shows up in the corner.