What is a good wireless signal strength (V722W)?

Support
1

Hi all,
I’m doing a bit of wireless troubleshooting - I know the SkyBell requires very high signal strength (90%+) to be considered good; is there a similar guideline for V722W or other WiFi cameras?

I’m having trouble getting past 50-60% even with a dedicated 2.4 repeater just inside the wall where cameras are installed.

Thanks,
-Michael

2

Signal strength bare minimum for most Alarm.com cameras is around 55% or so.
The SkyBell is about 90%.

Alarm.com recommends 80% signal strength to avoid any unexpected behavior.

Additionally, the minimum bandwidth for standard resolution/quality is 1.5 Mbps upload per camera in use for the '22 series.

3

Thanks as always for the speedy response; now I now what to aim for!