IQ PANEL 2 & 2 PLUS - 2.3.0 SOFTWARE UPDATE
New Features:
• Added support for up to 4 Partitions along with a screen lock to limit access
• UL1610 Central-Station Burglar Alarm compliance added for commercial applications
• Commercial device names added
• 6 digit user codes now supported
• Added support for new PowerG Devices:
• Smoke Detector (PG9936)
• CO Detector (PG9933)
• Recessed Contact (PG9307)
• NEW Vanishing Door/Window (PG9303)
• NEW Door/Window with Aux input (PG9309)
• Outdoor Door/Window (PG9312)
• 360° Ceiling-Mount PIR (PG9862)
• 2-Way Wireless Keypad Arming Station (WS9LCDWF9)
• Panel Camera Improvements:
• Panel Camera “peek-in now” & “peek-in next motion” from Alarm.com added
• Disarm Photos after Remote Disarm (Bluetooth, Keyfob or Alarm.com Disarm), triggered by first motion
detected from the built-in Panel Motion
• IQ Remote Link Quality tool added to measure Panel to IQ Remote Wi-Fi connection performance
Fixes/Improvements:
• Maximum number of supported Thermostats changed from 6 to 10
• Maximum number of supported Door Locks changed from 6 to 20
• Automatic Daily Communication Test (24 hour) now supported
• User Code names (First Name, Last Name) now sync between the Panel and Alarm.com
• Fixed an issue so that the swinger shutdown count (1 -6) now performs as designed
• Added new Sensor Type (Temperature - Group 51) for the PowerG Temperature Sensor (PG9905) to allow for raw temperature sensor monitoring with settable High and Low thresholds
• Improved integration with the PowerG PIR CAM (PG9934P or PG9944) so that the Panel now captures 10
images from the PIR CAM during an alarm event and stitches them together into a video that is stored locally on the panel. 1 static Alarm Photo from the PIR CAM is also sent to Alarm.com
Update Instructions:
Compatibility Note: Your IQ Panel must be on software version 2.0.1 or higher and connected to Wi-Fi to install
this update wirelessly.
1- Swipe down from the top of the screen and touch “Settings"
2- Touch “Advanced Settings”
3- Enter a valid installer code (default is 1111)
4- Touch “Upgrade Software”
5 -Touch “Patch Tag” and enter the patch iqpanel2.3.0 then touch OK
6- Touch “Upgrade Using Network” (panel must be connected to Wi-Fi). Update will download and install
7- Once complete touch “OK” to reboot the panel. DO NOT TOUCH THE SCREEN. The update process will
take approximately 5 minutes. After the panel reboots the home screen will appear and the LED will turn green.