IQ Panel 4 no wifi or cellular

[jwcsurety (Jason)]

Thank you for following up. For other readers, PowerG programming steps can be found here:

Qolsys IQ Panel 2, IQ Panel 4 Sensor Programming PowerG

This guide covers some common programming choices for PowerG sensors wth the Qolsys IQ Panel 2/2+, and 4 alarm panels. Below is the pathway taken at the panel to access sensor programming. We recommend manually programming the sensor. To do so, tap Settings > Advanced Settings > enter installer code > Installation > Devices > Security Sensors. Use the Add Sensor option and this will open the sensor configuration page. First set the Source field near the bottom right to PowerG. From there, ent…