Changing a defective window contact

Please define the steps to be followed to remove and install a window switch.
The sensor that will be used as the replacement is one that was originally shipped with order, and likely already has a name. However, this one was not used.
The window switch being removed is defective, giving a tamper for no reason.
Thank you.

Certainly, happy to help!

This video shows how to remove a sensor from your panel programming for a Go!Control panel.

It looks like this would be referring to the DW10 door window contact. This post shows how to program a DW10 as a Window contact.

If it is currently programmed into the panel as a different zone, you could simply change the name and applicable programming fields to match those in the link above.