Alarm.com Smart Thermostat ADC-T3000

[tyler (Tyler G)]

Troubleshooting

Alarm.com Smart Thermostat ADC-T3000 - Installation and Operation

Troubleshooting Heating or cooling does not turn on when the set point is above or below the room temperature To prevent damaging the compressor, the thermostat inserts a delay when cycling the compressor. If the system should be on and it’s not, then change the set point to be 2 degrees beyond the current set point and wait 5 minutes to see if the system turns on. If not, contact a local HVAC professional. Heat pump is “cooling when it should be heating” or “heating when it should be cooling” S…